Thank you for your continued patronage of POKETLE.
POKETLE sells spare (replacement) parts for our products as part of our efforts to enable you to use our products for a longer period of time.
This time, we will introduce the " POKETLE vidro mahobin inner glass replacement set ".
We will introduce the replacement procedure and some points to pay attention to in order to ensure a smooth replacement.
First, please read the "Before Use", "Caution", and "Replacement Instructions" sections in the instruction manual and follow the instructions before using the battery.
"④ Replace with new parts"
- The included gasket is securely attached to the inner bottle.
Make sure to place the gasket securely into the mouth of the inner bottle as shown in the photo on the right.
- The bottle is securely set in the main body.
Place the mouth of the inner bottle inside the main body (middle blue circle in the image above).
If the bottle is not inserted all the way into the bottle holder, it will stick out a little when viewed from the side, as shown in the left image. Insert the bottle all the way into the bottle, as shown in the right image.
"⑤ Attach the bottom by turning it with your hands."
In this procedure, before twisting the bottom of the main unit back into place, please check the following points to ensure a smooth replacement.
- Loosen the bottom screw
"⑥Finally, use the tool to tighten it firmly."
Please refer to the middle right photo above for the depth to which the bottom screws should be tightened.
*The inner glass of this product is made by hand one by one. Also, due to the nature of glass manufacturing, the size varies from product to product, so the depth to which the screw tightens may differ slightly from the image. Please note that this is a product specification to compensate for individual differences in glass size.
After replacing the product, fill it with water and check for leaks before using it again.
We hope you will continue to use POKETLE products.